Lumber & Building Materials
THE QUALITY INSULATION YOU NEED
We stock many types of insulation: fiberglass batts, mineral wool batts, fire and sound attenuation batts, rigid foam board and Hi-R Sheathing. Our experienced staff will help you find the the right type of insulation to meet your building needs.
We stock the following types of insulation:
KNAUF EcoBatt®
FIBERGLASS BATT INSULATION – KRAFT FACE
Knauf: EcoBatt Insulation provides cost-effective thermal and acoustical barriers for energy-efficient construction. The consistent quality, low dust, and clean-cutting resilient fibers make fabrication easy and installation fast.
| Type | 16oc | 24oc |
|---|---|---|
| R11 2X4 | ● | |
| R13 2X4 | ● | ● |
| R15 2X4 | ● | |
| R19 2X6 | ● | ● |
| 20 2X6 | ● | |
| R21 2X6 | ● | ● |
| R22 2X6 | ● | |
| R25 2X8 | ● | ● |
| R30 2X10 | ● | ● |
| R38 2X12 | ● | ● |
| R49 2X12 | ● |
Roxul SAFE'n'SOUND
Rockwool: Roxul SAFE'n'SOUND is a stone wool insulation for use in interior partitions of residential wood and steel stud construction where superior fire resistance and acoustical performance are required. Roxul SAFE'n'SOUND provides an easy friction fit into walls, ceilings, and floor applications.
3”x16” BATTS IN STOCK
FOAMULAR® 250
XPS EXTRUDED POLYSTYREENE (RIGID FOAM INSULATION) 2X8 SHEET T&G
Owens: Corning Foamular is a polystyrene rigid insulation board that is water and pest resistant and is also a noise reducer. Uses include slab edges, foundations, under light slabs, steel stud sheathing, masonry cavity walls, and concrete tilt walls. It insulates and protects foundation waterproofing.
| NOMINAL BOARD THICKNESS | Thermal Value |
|---|---|
| 1” | 5.0 |
| 1 ½” | 7.5 |
| 2” | 10 |
ENERGYSHIELD® HI-R SHEATHING
FOIL-FACED 4X8 SHEET
Hi-R Sheathing: Atlas EnergyShield Wall insulation is composed of a closed cell polyisocyanurate (polyiso) foam core, faced with tri-laminate foil. The blowing agent used to produce the polyiso foam core does not contain any CFCs, HCFCs, or HFCs. EnergyShield has zero Ozone Depletion Potential (ODP) and negligible Global Warming Potential (GWP). EnergyShield combines high R-value, durable foil facers, and water resistive attributes in a high-performance rigid wall insulation. EnergyShield is suitable for a variety of continuous insulation (CI) applications.
| NOMINAL BOARD THICKNESS | Thermal Value |
|---|---|
| ½” | 3.3 |
| ¾” | 5.0 |
| 1” | 6.5 |
| 1 ½” | 9.8 |
| 2” | 13.1 |
Huber Zip Roof and Wall
A structural roof and wall system with a built-in energy-efficient barrier keeps moisture out and reduces air leakage, while still allowing panels to properly dry.
WE STOCK 7/16" 4X8 IN WALL PANELS AND 5/8" 4X8 IN ROOF PANELS.
Spray Foam Insulation
WE STOCK A FULL RANGE OF REFLECTIVE INSULATION, WATER HEATER/PIPE INSULATION, WEATHERSTRIPPING, SEALERS, AND COVERS.
FEATURED Insulation MANUFACTURERS
“What a lovely, friendly place. I just needed one small item, and everyone in the store was so helpful even though it was in the middle of their deck show. They had free hot dogs and hamburgers for everyone to boot. It is the go-to place for hardware, wood, and advice on how to do a job.”
